Fix the autofocus on the Samsung GX10
This procedure allows you to correct front-focus or back-focus problems using the camera's hidden debug menu.
Tested on Samsung GX-10 firmware 1.30.
1. Create the debug file
Create a plain-text file named MODSET.TXT containing exactly:
[OPEN_DEBUG_MENU]
Important: The file must use Windows-style CRLF line endings, including a final newline. Otherwise, the debug menu might not appear.
Copy MODSET.TXT to the root directory of your SD card (not inside DCIM).
2. Enable debug mode
- Turn the camera off.
- Insert the SD card.
- Leave the SD card compartment door open.
- Turn the camera on.
- The hidden debug menu should appear.
- Set
DEBUG MODEto<EN>and confirm with OK. - Close the SD card door and return to normal camera operation by half-pressing the shutter button.
3. Adjust autofocus
- Press MENU.
- Navigate to the Setup menu.
- Find TEST MODE (3/3) and enter AF TEST.
- Leave
AF AREA TESTat0. - Select
FOCUS CORR.
The default correction should be 000 um.
Adjust the correction in small increments, confirming with OK and taking test photographs between adjustments.
- For front focus, try a negative correction first.
- For back focus, try a positive correction first.
- Verify the direction experimentally.
Test multiple focal lengths and lenses until you find a satisfactory correction. The adjustment is global, not lens-specific.
4. Disable debug mode
Once you're satisfied:
- Turn the camera off.
- Start it again with the SD card door open.
- Set
DEBUG MODEback to<DIS>. - Confirm with OK.
- Remove
MODSET.TXTfrom the SD card.
The autofocus correction remains saved.
Notes
- Write down your original
FOCUS CORRvalue before changing it. - Do not modify
AF AREA TESTor any EEPROM/LENS ROM settings. - A single correction may not be perfect at every focal length.
- This procedure corrects an AF offset; it cannot necessarily fix mechanical alignment problems.